Adafruit All

OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a b...

This woven conductive ribbon is great for powering lots of LEDs in a wearable project. It's thin, strong, smooth, and made completely of 316L stain...

Quadruple your power adapters with this wonderfully simple 4-way power jack splitter. All you have to do is connect a standard 5.5mm/2.1mm sized pl...

 These NeoPixel strips have 30 digitally-addressable pixel LEDs per meter and are very affordable and are only 12.5 mm wide, 10 mm if you remove th...

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB ...

This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 2.1W channels into 4 ohm impedance speakers (@ 10% THD). Insi...

Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. This tiny 5050 (5mm x 5mm) RGB LED ...

The "poor man's" accelerometer/motion sensor! These spring-vibration switches are low sensitivity non-directional vibration induced trigger switche...

Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on and 0.1" pitch breakout pins for easy connecti...

This massive multimeter has everything but the kitchen sink included. It's a great addition to any work bench or tool box.  It's low cost, simple t...

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch over...

How good is your multimeter really?  Or maybe your analog converter needs a good reference? Or lets say you want to test your microcontroller's con...

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and matc...

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-...

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-...

The "poor man's" accelerometer/motion sensor! These spring-vibration switches are medium sensitivity non-directional vibration induced trigger swit...

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 2...

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you! This is a 25 Pack of 4...

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RC...

Storing your components in old Adafruit shipping boxes is a fine way to keep organized, but our black boxes make it hard to know what's inside!  We...

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new stan...

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new stan...

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new stan...