Full Catalog

This 3.2″ × 2.1″ (82 × 53mm) solderless breadboard has four bus lines spanning the length of the board and 30 rows of pins, enough for up to four 1...

These premium jumper wires are stranded 26 AWG wires with female terminations on one end and male terminations on the other end, for use with 0.1″ ...

The compact (0.32″×0.515″) U3V12F12 switching step-up (or boost) voltage regulator takes an input voltage as low as 2.5 V and efficiently boosts it...

These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which i...

The A-Star 32U4 Mini LV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-up...

These premium jumper wires are stranded 26 AWG wires with female terminations on both ends, for use with 0.1″ (2.54 mm) male headers and connectors...

This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-tempera...

The S7V8F3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V output from input voltages between 2.7 V and 11.8 V. Its abilit...

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board me...

This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual MC33926 motor drivers operate fr...

Overview These boost (step-up) voltage regulators generate higher output voltages from input voltages as low as 2.5 V. They are switching regulator...

These premium jumper wires are stranded 26 AWG wires with female terminations on both ends, for use with 0.1″ (2.54 mm) male headers and connectors...

This M2.5 hex nut is made from steel, is zinc-plated, and comes in packs of 25.

These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 18.6 mm apart, which...

This switching regulator uses the SEPIC topology to produce 12 V from input voltages between 2.5 V and 18 V. The wide input range coupled with its ...

These premium jumper wires are stranded 26 AWG wires with male terminations on both ends, for use with 0.1″ (2.54 mm) female headers, connectors, a...

This powerful step-up/step-down regulator efficiently produces a fixed 12 V output from input voltages between 3 V and 30 V while allowing a typica...

This M2.5, pan-head screw is 6 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

These premium jumper wires are stranded 26 AWG wires with male terminations on both ends, for use with 0.1″ (2.54 mm) female headers, connectors, a...

The S7V8F5 switching step-up/step-down regulator efficiently produces a fixed 5 V output from input voltages between 2.7 V and 11.8 V. Its ability ...