Products

Are you frustrated by the lack of customization options for your jumper wires? Look no further! Compatible with both male and female wires, these f...

Beguiled by a fancy new chip that is only available in a SOIC or (T)SSOP pinout? This breakout PCB set will make your life much much easier and get...

For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto a B+ or A+ or Pi 2. It's har...

These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot easier to use as well! Eac...

These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot easier to use as well! Eac...

Put your project in stealth mode with these silent Soft Tactile Switch Buttons.  Tactile switches are standard input "buttons" on electronic projec...

If you've ever been curious about software defined radio (SDR), this USB stick is the easiest way possible to have fun with a powerful, configura...

Take your gardening project to the next level with a SHT-10 based soil sensor. The sensor includes a temperature/humidity sensor module from Sensir...

If you want to make a kit you'll need some solder. This 100g (about 1/4 lb) spool is just the right amount, not too much (like 1 lb spools) and not...

Used along with the solder sucker to clean up soldering messes. Wick really comes in handy when soldering or desoldering surface-mount parts. Even ...

If you want to make a kit you'll need some solder. This 0.1 lb (about 50 grams) spool is a good amount, not too much (like 1 lb spools) and not too...

If you want to make a kit you'll need some solder. This 0.1 lb / 50 gram spool is a good amount, not too much (like 1 lb spools) and not too little...

If you want to make a kit you'll need some solder. This 0.1 lb / 50 gram spool is a good amount, not too much (like 1 lb spools) and not too little...

These ingenious little clips make it easier than ever to use our analog RGB LED strips - no need to solder! The clips snap onto the ends of the LED...

This is really the fanciest, best feeling knob we've ever seen. Using this knob sort of reminded us of driving along the Amalfi coast in a perfectl...

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its...

Perfect for bread-boarding, free wiring, etc. This spool of solid-core wire is easy to solder to. When bent it keeps its shape pretty well. We like...

This spool of solid-core wire is easily soldered to and can handle up to 200°C and 600V. We like this wire because it's flexible but also holds its...

This 3" diameter speaker cone is the perfect addition to any audio project where you need an 4 ohm impedance and 3W or less of power. We particula...

Testing 123! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. ...

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camer...

They're yellow, they're square, they live in a pineapple under the sea... okay maybe not that last part, but this pack of three (3!) solder station...

Explore new microcontroller worlds with an ST-Link Programmer & Emulator / Debugging dongle. This little USB stick contains a microcontroller w...