Products

Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil ...

The LSM303D combines a digital 3-axis accelerometer and 3-axis magnetometer into a single package that is ideal for making a tilt-compensated compa...

This 4.6dBi peak gain full band LTE antenna has self-adhesive, 100mm cable with u.FL connector. A great option for 3G/4G-LTE applications. It works...

This single form antenna consists both primary LTE and GPS antennas.

This light and proximity sensor detects light over a wide dynamic range (0.01 lux to 64,000 lux) and proximity within a short range of ~5cm.  The ...

This M2.5 hex nut is made from steel, is zinc-plated, and comes in packs of 25.

This M2.5, pan-head screw is 6 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

A Python-powered USB DAQ! - 8 Analog Inputs (14 bit, 48KS/s, -/+10V), 8 Digital Inputs / Outputs (0 – 5V), 2 Analog Outputs / PWM (0 - 5V), 1 Pulse...

This sensor is essentially a reed switch, encased in an ABS plastic shell. Normally the reed is 'open' (no connection between the two wires). The o...

Overview This kit includes two dual-channel Hall effect sensor boards and two 10-pole magnetic discs that can be used to add quadrature encoding to...

Brushed motors are the most widely used motor because they are easy to use. Just supply the two terminals with DC power, the motor will start rota...

If you're going to be adding and removing wires to a project, these 2.54 pitch headers are an ideal way to make it easy and reliable. This box has ...

Building a line following robot for school project or competition? Or building an Automated Guided Vehicle (AGV) for industrial use? Maker Lin...

The Typical Problem Faced by Beginners in Learning Electronics on Raspberry Pi Raspberry Pi aims to bring the power of computing and digital mak...

Maker Pi Pico Base incorporates the much wished-for Reset button for your Raspberry Pi Pico, and gives you access to all GPIO pins on two clearly-l...

The Cytron Maker Pi RP2040 features the first microcontroller designed by Raspberry Pi - the RP2040 - embedded on a robot controller board. This bo...

Maker UNO is an Arduino Compatible board specially design to simplify building your projects: Coding & Electronics made easy with built-in co...

    WHAT IS MAKER UNO?     The Typical Problem Faced By Teachers In Conducting Arduino Classes   1. Most of the students do not have basic knowle...

Included in the standard package: unassembled MAKERbuino kit 128MB SD card loaded with games USB-TTL programmer board (for connecting your MAKERb...

You may be the greatest living banana pianist, but how will you ever know if you don't make yourself a banana piano? Good news! That project a...

We are pleased to now offer low-cost jumper wires in a variety of lengths! We have these jumpers in 100mm (4"), 200mm (8") or 300mm (12") increme...

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 ...

We are pleased to now offer low-cost jumper wires in a variety of lengths! We have these jumpers in 100mm (4"), 200mm (8") or 300mm (12") increme...

If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm ...