
Clearance and Overstock Items
Filters
- Arduino (2)
- Arduino > Bluetooth (3)
- Arduino > Display (1)
- Arduino > Feather (1)
- Arduino > Interface (1)
- Arduino > Shields (1)
- Breakout Boards > Amplifiers/Sound (1)
- Cables (4)
- Cables > USB (2)
- Cables > USB > USB Components (2)
- Electronic Components > Audio (3)
- Electronic Components > Capacitors (1)
- Electronic Components > Displays (6)
- Electronic Components > LED Matrixes (4)
- Electronic Components > LEDs (5)
- Electronic Components > Sensors (2)
- Electronic Components > Sensors > Environmental Sensors (2)
- Electronic Components > Sensors > Infrared (1)
- Electronic Components > Sensors > Light (1)
- Electronic Components > Sensors > Motion and Distance (2)
- Electronic Components > Sensors > Temperature (4)
- Electronic Components > Terminal Blocks (1)
- Power (2)
- Power > Converters (1)
- Power > Voltage Regulators (1)
- Prototyping > Breadboards and Protoboards (1)
- Prototyping > Headers (1)
- Prototyping > Wires (4)
- Raspberry Pi > Cables (1)
- Raspberry Pi > HATs (1)
- Raspberry Pi > Pi 4 (1)
- Raspberry Pi > Screens and Displays (2)
- Robotics (2)
- Robotics > Servos and Motors (1)
- Tools (1)
- Wearables (4)
- Wireless (2)
- Wireless > Adafruit Feathers (1)
- Wireless > Antennas (1)
- Wireless > Cellular (1)
Adafruit ADXL345 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI
AdafruitPlease note: This is the original, non-STEMMA version of this board. Once we sell out of these, we will not be able to get more! If you require a ...
View full detailsSolder Wire - SAC305 RoHS Lead Free - 0.5mm/.02" diameter
AdafruitIf you want to make a kit you'll need some solder. This 0.1 lb / 50 gram spool is a good amount, not too much (like 1 lb spools) and not too little...
View full details20W 4 Ohm Full Range Speaker
AdafruitListen up! This high power 4" diameter speaker will amp up any audio project where you need loud sound! It is 4 ohm impedance, rated for 20W contin...
View full detailsMonochrome 128x32 SPI OLED graphic display for Raspberry Pi or Arduino
AdafruitThese displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 ind...
View full detailsAM2302 (wired DHT22) temperature-humidity sensor
AdafruitThe AM2302 is a wired version of the DHT22, in a large plastic body. It is a basic, low-cost digital temperature and humidity sensor. It uses a cap...
View full detailsQuad Alphanumeric Display - Blue 0.54" Digits w/ I2C Backpack
AdafruitPlease note: This set contains the original, non-STEMMA version of the I2C backpack. Soldering is required. These great little displays can show a...
View full detailsL3GD20 (L3G4200 Upgrade) Triple-Axis Gyro Breakout Board
AdafruitA gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion ...
View full detailsAdafruit PT1000 RTD Temperature Sensor Amplifier - MAX31865
AdafruitFor precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a res...
View full detailsBluetooth 4.0 USB Module (v2.1 Back-Compatible)
AdafruitAdd Bluetooth capability to your computer super fast with a USB BT 4.0 adapter. This adapter is backwards compatible with v2.1 and earlier, but als...
View full detailsAdafruit Pi Box Plus - Enclosure for Raspberry Pi Model A+
AdafruitKeep your Raspberry Pi Model A+ computer safe and sound in this lovely clear acrylic enclosure. We designed this case to be beautiful, easy to ass...
View full detailsAdafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Green
AdafruitYou wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED...
View full detailsPanel Temperature Meter- reads °C
AdafruitPut a temperature meter (digital thermometer) anywhere with this very handy display. This panel meter displays the temperature of the attached wate...
View full detailsAdafruit 0.56" 4-Digit 7-Segment Display w/I2C Backpack - White
AdafruitNote: This is the original version of the i2C backpack. It does not have STEMMA connectors. If you require a different version, please contact us...
View full detailsMPL3115A2 - I2C Barometric Pressure/Altitude/Temperature Sensor
AdafruitThis pressure sensor from Freescale is a great low-cost sensing solution for precision measurement of barometric pressure and altitude. The MPL3115...
View full detailsINA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max
AdafruitNOTE: We have stock of the original, non-STEMMA version of this board. If you require a different version, please contact us! This breakout board...
View full detailsADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier
AdafruitNote: This is the original, non-revised version. It does not have STEMMA/Qwiic connectors. If you require the revised version, please contact us...
View full detailsMale / Male Jumper Wire, 12"
AdafruitHandy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 ...
View full detailsPremium Female/Male 'Extension' Jumper Wires - 40 x 12" (300mm)
AdafruitHandy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 ...
View full detailsAdafruit Yellow 7-segment clock display - 1.2" digit height
AdafruitI like big seven-segment displays and I cannot lie! Design a clock, timer or counter into your next project using our pretty, candy-bar sized 4-dig...
View full detailsMicro B USB Cable with LCD Voltage / Current Display
AdafruitPlease note: Our current stock is the original version, pictured at left. If you have any concerns about which version of the cable you will rece...
View full detailsAdafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor
AdafruitNote: this is the original, non-STEMMA version of this board! This breakout is chock full o' sensors! Add basic gesture sensing, RGB color sensing,...
View full detailsAdafruit DRV2605L Haptic Motor Controller
AdafruitPlease note: We have a limited supply of the original, non-STEMMA version of this board! Once these are gone, they're gone! If you require a diffe...
View full detailsFlora Lux Sensor - TSL2561 Light Sensor
AdafruitAdd light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital...
View full detailsAdafruit 12-Key Capacitive Touch Sensor Breakout - MPR121
AdafruitPLEASE NOTE: We currently have an older version of this board in stock. It has the same capabilities as described below, but does not include the ...
View full details