Power

Micro-USB Power Supply - 5.1V 2.5A - UL Listed - For Raspberry Pi 3B/3B+/2/1 and Zero, Zero W & Zero WH boardsThis is a high quality switching...

This handy USB micro-B to USB-C adapter direct from Raspberry Pi Trading will allow you to use your existing Raspberry Pi 2.5 amp power supply with...

Our all-in-one 5V 2.5 Amp + MicroUSB cable power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone or...

This power supply is an alternative to the "official" power supply from Raspberry Pi.  It works the same! Specs: USB-C 15.3W Input voltage: 9 0V A...

This is a really nice power supply. It's a switching DC supply so its small and light and efficient. It is thin so it fits in power strips without ...

Our pi-top [4] Accessory Bundle contains everything you need to get your pi-top [4] up and running! The bundle includes: pi-top Power Supply 15V 36...

This is a FCC/CE certified and UL listed power supply. Need a lot of 5V power? This switching supply gives a clean regulated 5V output at up to 200...

Need a lot of 5V power? This switching supply gives a clean regulated 5V output at up to 4 Amps (4000mA). 110 or 240 input, so it works in any cou...

If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! There is a 2.1mm ...

Make a nice portable power pack with this 4 x AA battery holder. It fits any alkaline or rechargeable AA batteries in series. There's a snap on cov...

Imagine terminal blocks that are cut out of one solid piece of brass, designed to distribute power. Well, that's what we have here! These machined ...

Make a portable power brick with plenty of juice! Use Alkaline AA's for a 9V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 7.5V supp...

Add a power switch to any USB-powered project simply by plugging this between the USB power port and the USB cable. This is the most useful thing y...

The MI:power board for the BBC micro:bit brings real portability to your wearable projects. The stylish, lightweight PCB is designed to fit snugly ...

Overview These boost (step-up) voltage regulators generate higher output voltages from input voltages as low as 2.5 V. They are switching regulator...

A Feather board without ambition is a Feather board without FeatherWings! This is the Power Relay FeatherWing. It gives you power to control, and c...

The S7V8F3 switching step-up/step-down regulator efficiently produces a fixed 3.3 V output from input voltages between 2.7 V and 11.8 V. Its abilit...

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board me...

This is a beefy switching supply, for when you need a lot of power! It can supply 5V DC up to 10 Amps, running from 110V or 220V power (the plug i...

Need a USB jack for charging or powering a project, but don't want to lug around a computer? This switching supply gives a clean regulated output a...

The S7V8F5 switching step-up/step-down regulator efficiently produces a fixed 5 V output from input voltages between 2.7 V and 11.8 V. Its ability ...

The PowerPad Launchpad breaks out two pins from a CR2032 connected in series with a switch, so that it can be connected to other components. This o...

The S7V8A switching step-up/step-down regulator efficiently produces an adjustable output between 2.5 V to 8 V from input voltages between 2.7 V an...