Power

This is a beefy switching supply, for when you need a lot of power! It can supply 5V DC up to 10 Amps, running from 110V or 220V power (the plug i...

Overview These boost (step-up) voltage regulators generate higher output voltages from input voltages as low as 2.5 V. They are switching regulator...

Need to power your micro:bit with something other than a couple AAA batteries?  We have the solutions! This micro:bit power supply module converts...

Description This product is compatible with the Raspberry Pi 3 The Pi PoE Switch HAT is a power over ethernet add-on board for the Raspberry Pi tha...

Need a USB jack for charging or powering a project, but don't want to lug around a computer? This switching supply gives a clean regulated output a...

The S7V8F5 switching step-up/step-down regulator efficiently produces a fixed 5 V output from input voltages between 2.7 V and 11.8 V. Its ability ...

The PowerPad Launchpad breaks out two pins from a CR2032 connected in series with a switch, so that it can be connected to other components. This o...

The S7V8A switching step-up/step-down regulator efficiently produces an adjustable output between 2.5 V to 8 V from input voltages between 2.7 V an...

This synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V while allowing a ty...

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board me...

Power your Pi with a wide range of (DC) input voltages from 3 to 16V! Wide Input SHIM lets you use a range of different DC power supplies with you...

This powerful step-up/step-down regulator efficiently produces an adjustable 4 V to 12 V output from input voltages between 3 V and 30 V while allo...

This is a 6 foot AC power cord, used with many power adapters such as our Meanwell 18V power supply. 6′ North American AC power cord AC plug type...

Recommended power supply for the Raspberry Pi Build HAT. Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. T...

The 0.6 Watt Volt small solar panel is a lightweight, waterproof, small solar panel designed for 5-7 year outdoor applications. It will charge 1S ...

he INA219 FeatherWing makes power-monitoring problems a thing of the past. Instead of struggling with two multimeters, you can just use the handy I...

This is a beefy switching supply, for when you need a lot of power! It can supply 12V DC up to 5 Amps, running from 110V or 220V power (the plug it...

The Adafruit Push-button Power Switch is a tidy little design that lets you control a DC power source using an everyday tactile button. The breakou...

You can't bake a cake without flour, sugar, and baking soda? Cream cheese? Muscadet? Ok - to be honest we don't do much cake baking.  But we do lig...