Skip to content

Raspberry Pi Pico

Original price $4.00 - Original price $5.99
Original price
$4.00 - $5.99
Current price $4.00
Version: No Headers

Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces.  The Pico is programmable in MicroPython and C++.

Available with or without male or female headers.


Designed by Raspberry Pi, RP2040 features a dual-core Arm Cortex-M0+ processor with 264kB internal RAM and support for up to 16MB of off-chip flash. A wide range of flexible I/O options includes I2C, SPI, and - uniquely - Programmable I/O (PIO). These support endless possible applications for this small and affordable package.

Find out more!

Well documented

Whether you’re taking your first steps with a microcontroller or you want to develop a product using RP2040, we’ve put together the guides and tools you’ll need to get the most out of Raspberry Pi Pico.

View the documentation!


    • 21 mm × 51 mm form factor
    • RP2040 microcontroller chip designed by Raspberry Pi in the UK
    • Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz
    • 264kB on-chip SRAM
    • 2MB on-board QSPI flash
    • 2.4GHz 802.11n wireless LAN (Raspberry Pi Pico W and WH only)
    • 26 multifunction GPIO pins, including 3 analogue inputs
    • 2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels
    • 1 × USB 1.1 controller and PHY, with host and device support
    • 8 × Programmable I/O (PIO) state machines for custom peripheral support
    • Supported input power 1.8–5.5V DC
    • Operating temperature -20°C to +85°C (Raspberry Pi Pico and Pico H); -20°C to +70°C (Raspberry Pi Pico W and Pico WH)
    • Castellated module allows soldering direct to carrier boards (Raspberry Pi Pico and Pico W only)
    • Drag-and-drop programming using mass storage over USB
    • Low-power sleep and dormant modes
    • Accurate on-chip clock
    • Temperature sensor
    • Accelerated integer and floating-point libraries on-chip


    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare