Skip to content

This is the FeatherWing Tripler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are three! The magic of the Tripler comes when you want to connect your Feather to two other Feather Wings without needing any stacking headers! The Tripler comes with:

The Tripler, like the Proto, has three breakouts for each pin on a Feather, as well as a bunch of plain grid proto holes. Also, the three sets of pins are cross connected and for GND and 3.3V, we give you a full strip of connected pads.

You'll need to solder on the female headers to the PCB, the Tripler comes as a mini kit!

Technical Details

  • Assembled Dimensions: 71.25 x 51 x 12 mm / 2.8" x 2" x 0.46"
  • Assembled Weight: 18.2g / 0.64oz
RoHS 2 2011 65 EU CompliantRoHS 2 2015 863 EU Compliant

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare