Raspberry Pi PoE+ HAT

CED-SC0468

$20.00


Use this HAT to add PoE or PoE+ capability to your Raspberry Pi's Ethernet port. Compatible with Raspberry Pi 4 and Raspberry Pi 3B+. Power-sourcing equipment is required.

Specification

  • Standard: IEEE 802.3at-2003 PoE
  • Input voltage: 37-57 V DC, Class 4 device
  • Output power: 5 V DC/4 A
  • Cooling: 25 mm × 25 mm brushless fan delivering 2.2 CFM for processor cooling
  • Features: fully isolated switched-mode power supply; fan control
  • Operating temperature: 0 °C to +50 °C

Installation

Connecting your PoE+ HAT to your Raspberry Pi

  • Before installing the PoE+ HAT, you must attach the supplied spacers in the four corners of the board
  • Then connect the Raspberry Pi PoE+ HAT to the two 0.1" headers (40 + 4) that are fitted on your Raspberry Pi
  • Once the PoE+ HAT board is connected, you can power your Raspberry Pi through its RJ45 network connector

Disconnecting your PoE+ HAT

  • Take care when separating the HAT from your Raspberry Pi
  • Pull evenly so that it detaches from all the pins at the same rate; do not pull one end of the connector off before the other

Additional information

No modification to the main Raspberry Pi board is needed for this product to work. Please ensure that your Raspberry Pi’s software is up to date for all functionality to be available. The PoE+ HAT is fitted with a small fan that is controlled by your Raspberry Pi via I2C. The fan will turn on and off automatically depending on the temperature of the main processor on your Raspberry Pi.

Documents

Compatible Cases

For use with the Pi 4, the PoE HAT is compatible with the following cases:

For use with the Pi 3B+, the PoE HAT is compatible with the following cases:

Compliance

The Raspberry Pi PoE+ HAT has undergone extensive compliance testing and meets a number of regional and international standards.

View and download relevant certificates and conformity documents.

If you require any further information regarding compliance, please contact us at compliance@raspberrypi.org.

Obsolescence Statement

PoE+ HAT will remain in production until at least January 2027